Our company supplies two types of the jaw trap for moles and voles - the galvanized and the black coated trap. Our traps are very easy to use. The aplication of the jaw trap is based on the principle of the jaw pliers where the strong spring presses them together. There is also a safety trigger in the middle of the jaw pliers. Moles and voles regularly clean their tunnels. It is crucial for us, too. When they do that, they hit the safety trigger and release it. The trap is activated and catches them.
Direction for useBefore you start, it is good to trample down all the molehills. The next day check all the molehills; apply the trap into the molehill which is restored. Uncover the molehill with the shovel; continue until you see the horizontal tunnel. Once you can see it, put the trap into the tunnel. Open the trap and put the safety trigger between the jaws. The next step is to place the trap into the tunnel. The important thing is that the safety trigger has to be at the right angle to the tunnel. Use a piece of wood or a bucket which you set upside down to cover the tunnel with the trap. Before you start it is good to leave the trap outside for a couple of days, so it loses its aroma. Be careful when you manipulate the trap and always wear your gloves on, to avoid leaving human odor at mole and vole trap sets. After the capture of the mole is suitable to set the trap again, because there is rarely only one mole in the garden.
The trap is simple, but highly-developed mechanism, which enables quick setting of the trap a effective capture of the moles and voles. The trap is made of fine steel ensuring long duty and repeated use.
- 3 cartons per layer, 4 layers on the pallet = 12 cartons per pallet
- pallet gross weight: 308 kg
- 1.200 pcs on the pallet
- size of the pallet: 120 x 80 x 190 cm
- pallet cubature: 1,82 m3
- 1 pc in plastic header, 100 pcs per shipping carton
- Size of the carton: 530 x 330 x 420 mm
- Carton gross weight: 24 kg
- Carton cubature: 0,0735 m3